Installing Your Fence On Concrete

1. Mark exact location of post on concrete

2. Drill two (2) - 1/2 inch holes in the concrete slab in opposing corners

3. Epoxy 2 length of 1/2 inch rebar into the concrete. Insert rebar into holes and add expoxy cement to hold in place.

4. Place vinyl post over rebar and install rails and pickets. Put a piece of duct tape on the end of each rail before inserting into post to keep wet cement from running into rails

5. Pour wet concrete into post

Still need help? Call us toll free at 1 (800) 213-2539